Sierra .375 350gn SMK. Confirmed data sought.

Joined
Jul 16, 2012
Messages
15
Location
Australia, Victoria.
Hiya guys,

I'm running the Sierra 350grn Match Kings in my wildcat LR hunting rifle (.375/338LM IMP based). Getting 2850fps with a mid level load as I don't want to stuff my brass up too quick.

I've swapped over to this bullet since they have become more readily available now. Just wanting to seek some confirmed data from you guys stateside who have had this bullet for a while now.

The published BC on the Sierra website seems pretty good thus far, but I have yet to push this bullet past 750m. Does anyone have BC and spin drift data for a 1-10 tube that differs greatly from the published data for BC and calculated spn drift data from Exbal?

Cheers, Sledge....
 
With a bit more MV, 3250 FPS, the published bc steps are quite close to 1000 yds.

Out of a 10 twist bore.

More definitive work will be forth coming.
 
I have bought 500 of them but have decided to wait to cut chips to see if Big Green is really going to find time to built the big SMK's. They are on the list to do as a future project but as of the last data I got form them nothing was scheduled.

Going to design a cartridge for HV Class to use in competition--will be a wind killer!!!
 
Am I missing something? I thought the 350s WERE the big SMKs???



I have bought 500 of them but have decided to wait to cut chips to see if Big Green is really going to find time to built the big SMK's. They are on the list to do as a future project but as of the last data I got form them nothing was scheduled.

Going to design a cartridge for HV Class to use in competition--will be a wind killer!!!
 
Well how about that!!! Had several telecons with a couple of folks up there this time last year about this and they are really out!!! Just saw them on the site --- calling Speedy now to make sure I get the right reamer spec to Kiff. Of Boy---going to do a 375 Slow Poke!!
 
Last edited:
Warning! This thread is more than 13 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top