Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Shoulder bump headspace
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Brad615" data-source="post: 2303642" data-attributes="member: 46747"><p>Hello,</p><p> I'm having an issue with shoulder bump/adjusting my headspace & hoping somebody can help. I use redding competition dies (FL sizing die & micrometer seating die) with redding competition shell holders & RCBS shell holder. So I resized my brass & noticed my shoulder bump was not adjusting to the 2 thou under that I'm looking for. I have moved my die to both cam over, to just touching, to off the die slightly. I used every redding shellholder as well as rcbs shellholder & it will not adjust up towards the 2 thou under my fired brass measurement. In fact it only keeps moving it the opposite direction (10-15 thou under my fired brass) I did use the same piece of brass with each shell holder & die adjustment. Could it be that I'm using the same piece of brass? Something I'm doing wrong? Problem with my die? Any help would be appreciated. Thank you.</p></blockquote><p></p>
[QUOTE="Brad615, post: 2303642, member: 46747"] Hello, I'm having an issue with shoulder bump/adjusting my headspace & hoping somebody can help. I use redding competition dies (FL sizing die & micrometer seating die) with redding competition shell holders & RCBS shell holder. So I resized my brass & noticed my shoulder bump was not adjusting to the 2 thou under that I'm looking for. I have moved my die to both cam over, to just touching, to off the die slightly. I used every redding shellholder as well as rcbs shellholder & it will not adjust up towards the 2 thou under my fired brass measurement. In fact it only keeps moving it the opposite direction (10-15 thou under my fired brass) I did use the same piece of brass with each shell holder & die adjustment. Could it be that I'm using the same piece of brass? Something I'm doing wrong? Problem with my die? Any help would be appreciated. Thank you. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Shoulder bump headspace
Top