6point5x284
Well-Known Member
WILLING TO TRADE:
Savage 111 Long Range Hunter in 6.5x284 with Dead Nutz one piece 20 MOA rings. I added a factory Savage DBM but have original hinged floor plate as well. Shoots a rugged clover leaf at 100 yds. I should have some pictures of targets laying around from break in period. Broken in shooting 1, cleaning for 10 shots, and then shooting 5 and cleaning for 4 cycles. Shoots great, even during break in. Have shot less than 100 rounds including break in. Also have a LOT of brass if anyone interested in buying. I bought 200 Norma and 200 Lapua brass. Prepped, and weighed brass, and chucked any brass out of my tolerance. I have about 190 of the Lapua (I think they are all primed with Fed 210M primers) and have about 150 of the Norma (not sure if they are primed or not). Bullets and powder not for sale. I also have redding comp 3 die set if interested in buying. Currently the scope below is zeroed on the rifle. Rifle has a small spot where the "rubber" material came off the accustock when carrying it in a Gun Bearer sling on a recent wolf hunt. Muzzle brake was purposefully left in the closed position to increase velocity (rifle doesn't kick much at all). I have not tried to open it since, but have read some can sieze in the closed position if left closed like I did. I can easily spot hits through the scope as is and have never needed the brake but want to disclose everything.
or
Zeiss HD5 5-25x50 Z-Plex. Mounted on rifle above. Comes with factory box and covers.
FOR:
Rem 700P or Rem 700 5R in .308.
Looking for a .308 with the HS Precision stock already on it to swap barrels for a 6.5 CM build. Building a poor mans PRS rifle. Would consider trading both the rifle and scope for a 6.5CM on Rem 700 action or custom barreled action, etc...
Thanks for looking.
Savage 111 Long Range Hunter in 6.5x284 with Dead Nutz one piece 20 MOA rings. I added a factory Savage DBM but have original hinged floor plate as well. Shoots a rugged clover leaf at 100 yds. I should have some pictures of targets laying around from break in period. Broken in shooting 1, cleaning for 10 shots, and then shooting 5 and cleaning for 4 cycles. Shoots great, even during break in. Have shot less than 100 rounds including break in. Also have a LOT of brass if anyone interested in buying. I bought 200 Norma and 200 Lapua brass. Prepped, and weighed brass, and chucked any brass out of my tolerance. I have about 190 of the Lapua (I think they are all primed with Fed 210M primers) and have about 150 of the Norma (not sure if they are primed or not). Bullets and powder not for sale. I also have redding comp 3 die set if interested in buying. Currently the scope below is zeroed on the rifle. Rifle has a small spot where the "rubber" material came off the accustock when carrying it in a Gun Bearer sling on a recent wolf hunt. Muzzle brake was purposefully left in the closed position to increase velocity (rifle doesn't kick much at all). I have not tried to open it since, but have read some can sieze in the closed position if left closed like I did. I can easily spot hits through the scope as is and have never needed the brake but want to disclose everything.
or
Zeiss HD5 5-25x50 Z-Plex. Mounted on rifle above. Comes with factory box and covers.
FOR:
Rem 700P or Rem 700 5R in .308.
Looking for a .308 with the HS Precision stock already on it to swap barrels for a 6.5 CM build. Building a poor mans PRS rifle. Would consider trading both the rifle and scope for a 6.5CM on Rem 700 action or custom barreled action, etc...
Thanks for looking.