Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
rechamber 7mm weatherby to 7mm STW
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Lefty7mmstw" data-source="post: 1556725" data-attributes="member: 48043"><p>For a 300 or 340 roy it would take a barrel and possibly a bit of stock inletting. My buddie's Accumark 300 roy will already go to 3.7" oal so you'll probably reach or get close enough to the lands without a Wyatt's box with a standard reamer. The Manson reamer used on my rifle in 7stw usually requires no more than 3.8" to the lands. I run 3.65" to 3.75" on a stock remmy box good for 3.670".</p><p>If you want to do one from a 7roy or the like (standard action length stuff) remember the action is the same length, there is a false wall at the front of the mag well to accommodate the shorter follower for the standard length chamberings. You will likely need to rework the mag well and find a longer follower.</p></blockquote><p></p>
[QUOTE="Lefty7mmstw, post: 1556725, member: 48043"] For a 300 or 340 roy it would take a barrel and possibly a bit of stock inletting. My buddie's Accumark 300 roy will already go to 3.7" oal so you'll probably reach or get close enough to the lands without a Wyatt's box with a standard reamer. The Manson reamer used on my rifle in 7stw usually requires no more than 3.8" to the lands. I run 3.65" to 3.75" on a stock remmy box good for 3.670". If you want to do one from a 7roy or the like (standard action length stuff) remember the action is the same length, there is a false wall at the front of the mag well to accommodate the shorter follower for the standard length chamberings. You will likely need to rework the mag well and find a longer follower. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
rechamber 7mm weatherby to 7mm STW
Top