Need help interpreting OCW test results

This is my first OCW test (also first time using this powder and bullet) and I'm having difficulty extracting meaningful data from it. The figures I have for distance and degree aren't perfect but they're pretty darn close. Nothing stands out as being an OCW "node". Does anyone see something I don't? Any suggestions for the next step in load development? I'm not the greatest marksman and conditions weren't perfect so that may be a factor. Thanks for reading.

-6.5 Creedmoor
-144 grain Berger Long Range Hybrid Target
-H4350
-CCI 200
-2.202 CBTO (~2.9 OAL)
-Hornady brass
-Factory Browning X-bolt, 28" barrel
-Shooting from the bench with bipod and rear bag, moderate wind @ 6 o'clock
-target at 100 yards
-shot "round robin" style in ~1 hour total time
-no chrono data with these shots as I didn't want to affect POI with the magnetospeed, but I did get velocity with the three foulers: 38 grains at 2478, 38.8 grains at 2563, 39.6 grains at 2617.


View attachment 196307


If it were me I would comfirm 41.8 and 42.0. It is a nice decently wide node.
 
Last edited:
Warning! This thread is more than 5 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top