Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
30-06 with Reloader 26 load data with 210 gr Berger or accubond bullets. Request please.
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Vol1975" data-source="post: 2035944" data-attributes="member: 100380"><p>Gents. </p><p>thank you very much for your feed back on the data. </p><p>after a lot of research both from this forum, quick load, and so forth what I ended up doing in addition to the data is calling </p><p>Capstone precision group and asking if they had any information. They are over alliant powder for un published data 660-460-2802</p><p></p><p>here is what they told me on rl 26 and 210VLD</p><p></p><p>first they had no published data or un published data for bullets lights than 210.</p><p>-this is the load data they had for me u published for 210 Berger VLD.</p><p>at sammi spec length with a maximum full ratio of 105% is listed</p><p>Start—54.5 @2480 - 59.3 @2716fps</p><p>BOB told me that if it was longer than Sami specs (which most people load longer than Sami) then u could have more case fill and more velocity. </p><p></p><p>With all the data and now a good feel for what a starting point I feel confident that starting at 55 grain and slowing working up .5 grain increments. My hope is to find a good accuracy node with no pressure sigh in the 2700 - 2800 FPS In a 22 inch barrel. This should be a really nice woods gun round at close moderate ranges.</p><p>hope This helps other out in future. I will edit post to included the above findings.</p><p>thanks to all</p></blockquote><p></p>
[QUOTE="Vol1975, post: 2035944, member: 100380"] Gents. thank you very much for your feed back on the data. after a lot of research both from this forum, quick load, and so forth what I ended up doing in addition to the data is calling Capstone precision group and asking if they had any information. They are over alliant powder for un published data 660-460-2802 here is what they told me on rl 26 and 210VLD first they had no published data or un published data for bullets lights than 210. -this is the load data they had for me u published for 210 Berger VLD. at sammi spec length with a maximum full ratio of 105% is listed Start—54.5 @2480 - 59.3 @2716fps BOB told me that if it was longer than Sami specs (which most people load longer than Sami) then u could have more case fill and more velocity. With all the data and now a good feel for what a starting point I feel confident that starting at 55 grain and slowing working up .5 grain increments. My hope is to find a good accuracy node with no pressure sigh in the 2700 - 2800 FPS In a 22 inch barrel. This should be a really nice woods gun round at close moderate ranges. hope This helps other out in future. I will edit post to included the above findings. thanks to all [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
30-06 with Reloader 26 load data with 210 gr Berger or accubond bullets. Request please.
Top