Recent content by speedgun

Would you message me for details, for some reason I'm unable to direct message you.

Yes, let's make the transaction!

I recently had a new barrel manufactured and installed on my Remington 700 from a well known barrel company. I also had them perform some basic machine work on my receiver, as well as install a larger, machined recoil lug. While I own and do basic gun work on quite a few rifles, this is the...

I live in Oklahoma, but have a relative in Nashville that I would really like to take hog hunting. Any suggestions of someone near there that has hunts? Thanks...

Excellent transaction! Seller performed perfectly!

I've been trying to improve my resizing technique and purchased a set of modified shell holders so that I could control shoulder bump. I've been measuring my fired brass with the Hornady tool and my measurements are the same as that of new brass. Should I be seeing the shoulder move after the...

Thank you for that explanation, now I get to buy some more reloading equipment!:):):):)

I have a head space comparator, which I used when I was neck sizing. Now, I adjust my die about 3/8ths of a turn past full contact with the ram, which is exactly as Hornady recommends. Doesn't that prevent me from being able to adjust head spacing...

I'm a fairly new reloader and still developing my technique. I've been wavering back and forth between F/L sizing and neck sizing. I load for several different calibers and have multiple guns in each caliber so I always separate my brass to a specific gun and caliber. What I am confused about...

100gr Nosler Ballistic Tips, plenty of bullet and outstanding accuracy.

I'm not sure exactly how to respond except that after 1 or 2 reloading cycles, the Hornady cases started showing signs of excess pressure. After I actually had a case separate, I discarded all the brass that I had used, and changed the way I resized the cases. I assumed that the pressure...

Sorry, not understanding your question.

I'm by no means an experienced reloader, but I began reloading using Hornady brass and for me it seemed to show signs of excessive pressure after 1 or 2 reloads. I did try reducing the loads, it didn't seem to help. I started using Norma brass and from my perspective the Norma will last a lot...