Recent content by savage1103006

I'm running a Remington 700 custom 1-9¾ twist 26 inch barrel unknown manufacturer 83.1 grs of H870 with a 175 gr Sierra c.o.a.l 3.685 2997 fps. 150 gr Sierra Game Kings and 76.5 grs of IMR 7828 @ 3.690 c.o.a.l 3247 fps

Anyone try the 175 gr nosler long range accubonds if so what powder are you using

anyone ever try te new 175 gr nosler long range accu bond in there stw

73.2 gr H 4831 with 162 gr or IMR 7828

I mostly use IMR 7828 just loaded a few 162 gr SST to finish up the can of powder I was surprised. Shot tighter than what I thought it would. I have loaded 175 gr sierra game kings up with 83.1 GRS of H870 shot under a inch at 100

I had my STW built but even breaking the barrel in it shot tight with factory rounds now since I've started loading and expiermenting its getting even better

The 162 SST at 73.2 is max load in hornady manual. I've shot this load at 300 yards still tight at 1½ to 1¾ in groups. I was going to try a grain more. Why screw around with it put 3 shots in almost same hole is pretty decent considering I shot off a sand bag

Top was 140 accu bond with RL 25 bulls 3 shots 162 gr SST

this was at 100 yards

I'm running H4831 73.2 GRS with 162 gr SST

I use RCBS full length dies. gun)

I load by the book but I've never under stood why people hot rod there bullets and then complain when they burn the throat out. If you want speed load a lighter bullets.

I just loaded some h870 up with 175 gr sierra game kings 83.1 grs hoping to get at 2800 book says 3000 fps we will see

I got some 175 sierra game kings loaded up with h870 to try figure 160-175 gr would be better at extended ranges..

I have 1-10 twist in my STW got a good load worked up with IMR 7828 and 140 accubond but I going to try some 162 gr SST and see if I get as good of groups with them