Recent content by MGN

Patriot Ordinance Factory Revolution piston driven https://pof-usa.com/firearm/revolution/ light weight and maneuverable

Check this. I have seen this and when you say you have pulled the other components except for the primer and then it fires points in this. Why this will now fires is the primer was seated further in by the firing pin the first time

I have 7 jewell triggers which get used in all environments and conditions that have never failed me. I cannot say this about two other brands I have used.

This! Went from the RCBS and my wife helping with chamfer and debur to a Giraud. My wife said buy another it is so easy.

For me it was for peace of mind. I previously was shooting around nine major matches a year, 15 local matches, burning up at least four barrels a year, plus hunting and everything that goes into it. To me I wanted to eliminate any concerns and speed up the process without going to a prometheus.

If you were looking for a scale that did weigh down to .001 I would suggest the sartorius entris 64-1s. I bought this because I did not like how my two chargemasters wandered and how slow they were. Was and is it overkill YES. Does the magnetic force restoration and speed beat two chargemasters...

I used the Ultra HD benches others have spoke about. Adding a sheet of plywood along the bottom leg cross bars and then an upper shelf from plywood attached with L brackets. I then purchased a smaller Ultra HD table to work as a die holder and powder station. I forgot to add nothing is bolted to...

When it comes to selecting a stock I recommend finding someone in the area that will let you shoot what you are looking at this way you know it works for you ergonomically. I have been lucky to live in an area where there are many shooters and I was allowed the opportunity to play with a lot of...

When I first started to reload my wife did the chamfer and debur steps while I trimmed the brass then I bought a Giraud ..... after she saw how easy it was she told me to buy another!! For setting up my trimmer I use the Hornady die lock ring place, it on the case holder, insert a piece of brass...

Why would you not want to go with a 20 MOA base? By using this type of base you will gain more elevation usage. Most of my actions are the type with an integral 20 MOA rail and it does not hurt anything.

Let me start by saying that this is my first true wildcat cartridge. I don’t count the 6x47 Lapua as you just run 6.5x47 Lapua through a sizer and shoot it. At the time of writing this I have 350 rounds of fire forming, load development, and torture testing down this barrel. This rifle is built...