Recent content by Magnum72576

I think I may have realized my error. The ejector is still in my bolt. I'm thinking this is supposed to be removed when feeling the resistance when closing the bolt. If so I guess I need to order another tool. Tony

The nickel cases are once fired from my gun by the builder. In the Broz video he shows how the bolt closing resistance decreases to almost none. Then he drops one size shell holder from there to get .002 headspace. I can't seem to get down to no resistance. I'm not familiar with measuring the...

This is a picture after I sized it. I will be using brass for my real loads but I'm using these nickel cases for my troubleshooting. Tony

Ill try and answer some of these question. Rockchucker press. I have contact between the shell holder and the dies. I'm 1/4 turn past contact. I use RCBS case lube and use the nylon brush with a little lube for the inside of the neck. I have forster FL sizer die and micrometer seater. I...

Yep. If you started with shell holder No. 1 you started at the wrong end of the routine. Check the video (Broz tells you the correct method) or read the instructions that come with the set. FearNoWind I did start with the correct holder. It's a .010 which Jeff calls the 10. The set has 5...

I have a 300 wm, Borden Timberline action. I recently watched the youtube video BROZ did on using the redding competition shell holder set to adjust headspace. I removed the firing pin assembly from the bolt and followed the direction BROZ laid out. Used a fired case. Ran it in my FL Sizer...

Rckymtnshooter, just so I'm clear my only variable to begin with is powder weight. Load 1 round at each increment. Shot them all at 300 yds. Then look for groups that are close in verticle separation. Then pick a group and fine tune from there with seating depth for example. I never heard...

Thanks for all the great info guys.

I've scoured the internet regarding this topic. However I feel more confused than ever. Can you guys direct me towards what you feel is the best approach for hunting load development for my custom 300 win mag. I hope to practice out to 1000yds. Many have had great success with h1000 and the...

I would try Nushagak guides, donovans guide service out of Dillingham. I have hunted with him before and his ooeration is A++ Tony

Sold pending funds

This scope is in excellent condition, Swarovksi Angled 80mm High Definition Spotter with 20-60 eyepiece. Includes hard case. $1950 includes shipping and insurance. Thanks Tony cell 518 396-6752

Hey Guys My custom mountain rifle build is only a few months from completion. I have to decide on a stock color/barrel color. I'm leaning towards a black cerakote barrel and possibly a tan stock. I'm open to other color combinations Can you post any pics you have a your rigs that may fit...

If anybody knows where I could get at least 200 that would be a big help. I live by Albany Ny. Its the last component I need for my new build coming in August. Thanks Tony