Hudge76's latest activity

Did you measure the shoulder of the brass after you resized it? I think your shoulder may not be bumped back enough.

Well I switched from RL26 to RL23 and kept everything. Else the same and got good results.

Hybrid 100V and Barnes 110 gr. TTSX

After firing the brass I measured the shoulders and they are the same as my fired factory 6.8 Western brass. The overall length though...

For loading, I took a once fired 6.8 piece of brass and made a modified case from it. With it, I took the bullet I wanted to load and...

So, my process was to trim it and then FL resize the brass in my 6.8 Western dies. As I mentioned, I made the overall length of the...

Have at it, I don’t k ow how much there is to pick though. I can tell you how I did it and my failure with 300 WSM brass as well.

Told not stole.

I know someone that works for Remington’s ammo plant. This individual stole me nearly 2 years ago since Vista bought Alliant, they use a...

I let a buddy use my Garmin to test a 7mm PRC (Savage) 22” against his 7mm RM (Rem 700) with 26”. We got no where near the advertised...

It was!

I have an ARC in a gas gun with the 1:8 twist Faxson (Brownell’s) barrel. It will shoot the heavies, but 1.1” 5 shot group is the best I...

I think you’ll be just fine using the 6 ARC on whitetails. There was a picture of a guy a couple years back that killed a brown bear...

There’s also Shooters World 4350.

What part of AK are you in? I’m not having problems finding SRP, LPP, or SPP here. Now LRP and LRMP, different story. Three Bears and...