Recent content by David Hunter

I am looking for a good rangefinder under $1000. I have a Leica 800 now that I am not satisfied with. I use the range finder resting on a sandbag, so I know it is not me shaking. If the target (whitetail) is over 450 I have trouble getting any readings, sometimes 400 is about all I can get...

My question is, what is the best method for supporting the action in the stock while the bedding hardens? I am bedding a 700 long action with a glued in Shehane single shot follower. The barrel weighs 7 1/8 pounds. The stock is a Shehane Tracker II. My usual method is to wrap tape around the...

I am a professional photographer. I use Carl Ziess lenses that cost $3500+ for 1 lens. I learned the hard way how to and how not to clean coated glass. 1. Use a strong bulb shaped blower to remove the dust etc. from the lens while holding the lens to be cleaned up side down. This can be bought...

I have a factory take-off, 26", stainless, standard contour, 300 R.U.M. barrel that has fired about 75 rounds. Along with it goes a custom Wilson hand bullet seater die that was sized by Wilson to fit this barrels chamber What would be a fair price to ask for the die and the barrel?

Does anyone know who can boost the power on a Leupold LPS 3.5x14? I know it can be done Harley Member # 99 had one for sale that had been boosted. Premier does not work on LPS's and Siebert does not work on variables. Is there anyone else?

Yes I've heard of the hammer bullets. Last I checked, his die was broken and he could not make anymore. I would use a 80 g Matchking.

Boyd, RL-25 seems too temperature sensitive too me. I am using H-1000 now. Since they are very close in burn rate. I will ***/u/me for 180-200g bullets You would say H-1000 would be a better choice than Retumbo?

On another board, someone said they got high extreme spreads when using Retumbo. Has any of you found that to be true also? I was thinking of trying it in .300 R.U.M. w/ 180g Sciroccos and 200g AccuBonds. I know some shooters like it with the heavier bullets. How does it work with mid-wieght...

Anybody know ow much H-1000 is a good start for the 220 MK

Thanks Guys

I remember someone on this board made a Ballistics Computer with an Excell spreadsheet. Is this still available?

First, is there any decent brass available for the 300 RUM or the 404 Jeffery? I was thinking of using 404 brass so I could have thicker necks then turning the necks to have uniform necks that work well in a standard chamber. I realize I must turn the head also. I am sure some of you have...

I need a stock for a Rem. Model 7. Various kinds considered. e-mail me if you have one. [email protected]

Scirocco BC\'s What is the BC for .308 180g Scirocco's