Recent content by AaronEdwardJames

  1. A

    .1 mil or .25 moa, which is best for long range precision shooting?

    1/8 moa scopes in my opinion are not needed unless your are shooting precision airgun shooting at 10 yards at thumbnail size targets, scope movments are that small on an 1/8 moa scope that the click are smaller at long ranges than the rifle is possible of achieving in group size, if 1/8 moa was...
  2. A

    .1 mil or .25 moa, which is best for long range precision shooting?

    I think for hunting situations and for instance shooting on a gallery range at paper targets MOA system is ideal , but for your right a military application or tactical shooting engaging multiple targets at various ranges under time etc mil is better because the maths is quicker and easier and...
  3. A

    .1 mil or .25 moa, which is best for long range precision shooting?

    Mil is better if ranging in metres, 1 click = 1cm at 100 , 2cm at 200m and so on, easier to take 1/4 ,1/2, 3/4, 9/10 winds eg if range is 500m, 10 kph wind at full value = 10 clicks a 1/2 value would b 5, 9/10 value would be 9 , I just think the maths is easier
  4. A

    Is the anything better than a 0.1 mrad schmit and bender 5-25 pm 2

    I mean over here in the uk, although it was 2 years ago or so since I was looking at buying one
  5. A

    Is the anything better than a 0.1 mrad schmit and bender 5-25 pm 2

    There is about a 12-15 month waiting list here for one now since they got the mil contract with us forces
  6. A

    Forster CO-AX press, Redding Comp seat, .338 LM

    Yes it fits
  7. A

    hammerbullets.com

    Website looks great job hope all goes well
  8. A

    300 grain Nosler accubond for long range hunting

    Thanks men
  9. A

    Accuracy International MCR 338 Lapua Magnum

    Half MOA or less out to 1000metres, all day long furthest I have available to shoot with 300 grain factory lapua scenar loads
  10. A

    Accuracy International MCR 338 Lapua Magnum

    Accuracy International MCR .338 lapua magnum
  11. A

    Is the anything better than a 0.1 mrad schmit and bender 5-25 pm 2

    Others may disagree but I just think S&B are in a class of there own and I wouldn't buy any model of scope if it wasn't S&B
  12. A

    300 grain Nosler accubond for long range hunting

    Yeah I'll be hunting out to about 900 metres is my limit I set, I am confident out to 1200 with 12"x12" steel plates but I just stick to 900 as my hunting max , I'm not new to shooting but relatively new to hunting game off the animal type that is. Taliban I take it doesn't count as game lol
  13. A

    300 grain Nosler accubond for long range hunting

    MAybe I should go for the 250 grains as even with n570 near max loads I can't get 2700fps , with 1.935 twist, I struggle with getting good velocitys here so maybe the 250 going 2950 or so would be the ticket
  14. A

    Headspace issue

    Right enough I didn't de prime when I done that , that's the problem alright,
  15. A

    Headspace issue

    I have fired factory 300 grain lapua loads and once all were fired I decided to reload them myself so I checked the headspace on Redding dial indicator and it was .004 over minimum, after firing my reloads I checked headspace to see how much expansion and it has shrunk down to .0025 thousands ...
See more

Top