Recent content by 7mm Wsm

  1. 7

    My customized Tikka T3

    Na wo du auch überall herumgeisterst? Schönes Gewehr, der Schuler macht wirklich a schöne Arbeit! viel Freude damit, Norbert
  2. 7

    Hs Dbm Sa

    Need an HS precision DBM SA for. 308 asap! Any ideas where to get? Thanks!!
  3. 7

    HS Bottom Metal

    Guys which company stocks an HS DBM SA for .308?? i`ll need one asap!! thanks for info
  4. 7

    Reamer bush

    Re: Reamer pilot Yes i mean the pilot!! Sorry for my bad english, i writ from Austria/Europe!!
  5. 7

    Reamer bush

    What material Do you use for the Bush on Top of the reamer?
  6. 7

    BAT VR Footprint in Manners stock?

    on their HP i can only choose between those above, i can try to find out if the can do a inlet for the BAT!! I´m from Europe so it is not so easy to get a stock from the states:rolleyes:
  7. 7

    BAT VR Footprint in Manners stock?

    Hello Guys!! I am going to order a Manners stock! Which footprint should i go for a BAT VR Action? I can choose between the Surgeon 591 or the Templar SA on their web page?? Please give me advice, thanks
  8. 7

    .875 DE Muzzle Brake

    Thanks, understood!! I already got the right plate for the barrel tenon!! so i can use the same for the brake too, because it has the same angle of 60°!! .625 is what i measured inside the brake, so i can start chambering and fitting barrel! thanks
  9. 7

    .875 DE Muzzle Brake

    Because there still is a thread inside the Defensive Edge Break!!
  10. 7

    .875 DE Muzzle Brake

    That´s the Problem, the size of thread is not common in Europe so i have to find out which size of cutting tool i need to buy!! Is it a 5/8 x 24 tpi?? that means 15.88 x 1,05 thread size in millimeter??
  11. 7

    .875 DE Muzzle Brake

    Does somebody know the thread size for this Brake?? thanks from Europe
  12. 7

    Action identification?

    Mauser K98 Action and Leupold ST Rail! :)
  13. 7

    Where to buy Custom Actions in Europe

    Hello Guys!! I´m looking for a new Custom Short Repeater Action for building my next Rifle Project! I´m from Austria/Europe. I will go with 6x47 Lapua. The Action i´m looking for should be stainless, with fluted Bolt, etc...,all the good staff!! Thanks gun)
  14. 7

    Full Custom 7mm WSM Stalker

    Hello Guys!! Today i went out for shooting the Rifle again. Distance was 570 yrds, wind 90 degrees about 6m/s, i shot 139 grs Hornady SST in front of 67.5 grs. Norma MRP at 3250f/s (Fireform load out of .270 WSM Norma Brass) I dialed 7MOA and 1.5 MOA for the wind, these are 4 shots at 0.75 MOA...
  15. 7

    Full Custom 7mm WSM Stalker

    It is also my first one and i guess its the best i ever had!! Very bright, sharp and clear, they use HD lenses. Here in Austria there we have some famous scope maker like Swarovski or Kahles. But for my solution, to go long range hunting and shooting, March is my favorite. i also love the Zero...
Top