Recent content by 700varmint

Hello, I am looking for information on a varget load for my 350 rem mag T/C encore carbine. I have on hand 150gr Remington PSP, 200gr Hornady round nose, 200gr flex tip's and 250gr round nose hornadys. has anyone ever used Varget with the 350? if so, what were your results and what loads are...

is there ever going to be one in left hand?

These are micrometer seater dies? pic please?

I too had trouble and Ty at Bearnes told me to go with 45gr in a 1:14 start .050 off the lands and move back from there and he also told me to send them with alot of speed and they will shoot. I took my Browning micro in 22-250 to the range with the load of 38.5gr of H380 and the bullet .050...

I think I have a extra set of 7mag dies, I will check tonight.

gotta plug the 6.5 rem mag with a 1:8 twist very close to the 264 win mag and does have a level of nostalgia

Hello all, I have been thinking about a 6.8 spc in a bolt gun namely a 700 remington with a varmint weight barrel. before I dive in head 1st I am looking for opinions. currently I shoot informally but weekly with a group of guys that we shoot 300-400 and 500 yards at midi's mini's and eggs...

not one mention of the 6.5 rem mag? I have one and I like it

my 1st - 2 cold bore shots will be nearly in the same hole, maybe not exactly 1/2 inch high but in the same hole none the less, the 3rd shot from this gun is usually 1/2 to 1 inch away from the 1st 2 shots, without adjustment every other shot will be 1/2 inch high at 100 yards. it almost seems...

I had one built about 10 years ago, I still have it, wont sell it and wont let you shoot it either LOL seriously I would let you shoot it to try it. I at the time was stationed in california and was comming home from deployment, I had the cash and wanted to treat myself, it is the best darn...

going right yes however, the hotter my barrel gets the better it shoots, I have re-bedded twice and removed the stress point near the forend of the stock. the group does not move. when I Fire 2 at 1/2 inch high and the 3rd shot will be 1" out then every group thereafter is 1/2 high at 100 yards...

Hello all, 1st post for me just found this forum the other day, anyhow I have a M700 that started life as a BDL 22-250 left hand. I have had the gun re-barreld with a shilen medium contour 26" barrel chambered in 260 rem and with a 1:9 twist. the action has been epoxy bedded, the barrel has also...