Barrel break in

backcountryguide

Well-Known Member
Joined
Nov 3, 2011
Messages
194
Guys my new Creedmoor is shooting lights out but my chrono results are interesting. The barrel is a Bartlein 1in8 twist 5r and Ive put 50rds through it so far with the 140 Hybrids on top of 43.5gr of H4350. Did a proper break in of shoot and cleans for 7 rounds at wich point the copper completely stopped. I am just wondering when it will settle in as far as velocity goes? I thought I would have reached that point. My Brux started shooting duplicates over the chrono around 35 rounds. gun)
 
It might change a little in velocity out to 100 / 150 rounds. But it should be consistent now. Are you seeing large ES between shots? If so move your chrono out to 18' from the muzzle.

Jeff
 
Actually Im seeing duplicates of diffrent velocities for example 2825 duplicate 2844 duplicate and the last to went 2835 duplicate so I am thinking its my chrono. Thank you for fast reply Broz
 
Any other advice on chrono setup Broz. I think my velocity should be a bit higher do to my tube being 28" long. I was thinking around 2850+
 
No, just set your chronograph out at 18' from the muzzle. I would not get to concerned about what you see for numbers yet. I have had many chronographs lie to me over and over, especially less expensive units. That is until I bought an Oehler 35. Working out drops to 1000 yards will give a better idea of real velocity. The proof is in the pudding.

Jeff
 
Usually a Bartlein doesn't require much break in! You are probably where you are going to be, whatever that is........rich
 
Unless your barrel's got the same chamber, bore and groove dimensions as the one the load recipe was developed with, your muzzle velocity can easily be 50 fps faster or slower than the data claims.

And your powder and primer lots are not the same as what the load was developed with. This will often change chrono'd loads 25 fps different than what the manual says.

Even with two people shooting the same rifle and ammo, a 25 to 50 fps difference in average muzzle velocity happens a lot 'cause the rifle's not held the same way by each shooter.

It's rare that anyone duplicating a published load gets the same muzzle velocity quoted for it. Even allowing for a 25 fps change for each inch of barrel length difference.

Working out drops to 1000 yards will give a better idea of real velocity. The proof is in the pudding.
It's possible, but how does one compensate for the inaccuracies of virtually all scope adjustment values per click? All internally adjusted scopes of a given make and model do not have exactly the same amount of impact change per click. To say nothing about the atmospheric conditions between the rifle and target that'll change the bullet's drop and there's no way you can measure them when the bullet's fired.
 
It's possible, but how does one compensate for the inaccuracies of virtually all scope adjustment values per click? All internally adjusted scopes of a given make and model do not have exactly the same amount of impact change per click. To say nothing about the atmospheric conditions between the rifle and target that'll change the bullet's drop and there's no way you can measure them when the bullet's fired.

Well some of us do check for calibration by measuring what the scope actually moves the impact and adjust the ballistic program to it. I will trust my actual drops to a 100$ chorny any day.

But what ever you say Yoda....:rolleyes:

Jeff

 
Last edited by a moderator:
Lets assume that I am not a complete novice Bart and that I know about chambers,powder,primers and a thing or two about killing big bulls a long ways away. This is not my first custom rifle or barrel just my first 5r Bartlein. Broz I didnt meen to drag you into a **** match thankyou for your consrtuctive advice.
 
If one measures scope adjustments without firing a shot, then all the variables in optics, humans and ammo are eliminated. Some know how to do this. Others don't.
 
Last edited:
Well some of us do check for calibration by measuring what the scope actually moves the impact and adjust the ballistic program to it. I will trust my actual drops to a 100$ chorny any day.

But what ever you say Yoda....:rolleyes:

Jeff

That is why you fail - YouTube

Got to say ,,,,Sometimes you are really funny.....Love this line,,, I have used it many times my self..
 
Broz I didnt meen to drag you into a **** match thankyou for your consrtuctive advice.

No problem here my friend. I will just let Mr.B argue with himself. If we wish to hear more of it one could always just read his past posts as the majority of them are simply degrading comments or argumental.

Got to say ,,,,Sometimes you are really funny.....Love this line,,, I have used it many times my self..

A little humor is good medicine once in a while. :)

Jeff
 
No problem here my friend. I will just let Mr.B argue with himself. If we wish to hear more of it one could always just read his past posts as the majority of them are simply degrading comments or argumental.



A little humor is good medicine once in a while. :)

Jeff

Ahhhhhcome on! Bart is just being Bart:D:D:D Aroyalpain
 
No problem here my friend. I will just let Mr.B argue with himself. If we wish to hear more of it one could always just read his past posts as the majority of them are simply degrading comments or argumental.



A little humor is good medicine once in a while. :)

Jeff

We need a lot more of it..( HUMOR ).have a great day ..
Pete
 
Warning! This thread is more than 12 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top