AZShooter's latest activity

Don't worry about the OAL of a loaded round. Just make it fit and feed from the magazine. This is where the Berger Hybrid design really...

Nothing wrong with going with the 257 Weatherby. You have all the components and the dies. You could have a custom reamer made with the...

I am not going along with the other's suggestions in this discussion. I felt I should share what I found on this subject I recently...

If you are not a turret twister the Trijicon Accupoint 3-9x40 is excellent. Lightweight at 13.4 oz with a built-in illumination feature...

If you go to Nosler's load data site you can see that their max load is 56 gr and is 101% full with a 2.8" OAL...

Bushings have an abrupt angle to their opening which may cause issues like collapsing shoulders on some case designs. I have often...

Thanks for those details.

Elk Hunter 338. first off, I like the short barreled rifles you have showcased here. Very interesting concept. Earlier in this thread...

$50 to $75 is the low end with perhaps $125-$150 for the high end for a takeoff barrel if the round count is low. I have purchased...

Earlier in the thread someone mentioned that there seemed to be complaints about the 7 RUM having too much recoil and the 300 RUM users...

Nice package! That ought to put an elk's feet in the air. What powder and bullet are you going to try first?

I use several compressed loads. At one point I had a load so compressed the bullets would move out of the case after a short time of...

Enjoyable thread everyone! With powder prices through the roof, I can't help but think some of us will not be experimenting with...

The 7 Rem mag necked up to 375 has been done. The chambering often called the 375 Taylor aka 375/338 win mag. Very easy to make by...

Get the texture! If you hunt in cold weather holding on to a slick rifle stock with gloves is a PITA! My Remington Ultimate MZ...