Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
270 wsm new 1-8 twist
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Rotten" data-source="post: 3093737" data-attributes="member: 129641"><p>Well I did it with a sized case and closed the bolt to seat the bullet and then measured the oval to ogive. After still not getting the velocity I was expecting. I rented a hand reamer and lengthened the freebore another .070 thinking it's not enough causing pressure. And maybe it still is.</p><p>I also did a cast of chamber and bore to see if the bore was under sized. But from my books the bore is to print.</p></blockquote><p></p>
[QUOTE="Rotten, post: 3093737, member: 129641"] Well I did it with a sized case and closed the bolt to seat the bullet and then measured the oval to ogive. After still not getting the velocity I was expecting. I rented a hand reamer and lengthened the freebore another .070 thinking it's not enough causing pressure. And maybe it still is. I also did a cast of chamber and bore to see if the bore was under sized. But from my books the bore is to print. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
270 wsm new 1-8 twist
Top