Recent content by Mcranch

In 83 my brother and I were on a lease in southern Texas, south of Sheffield off of 349. This place was 7000 thousand acres with deep draws ( canyons). One of the ways to get the deer moving out of the draws was to rock them. We would use large slings, like David and Goliath type or we would...

My neighbor has a high fence well made, barb at the bottom lock tight 8 ft net with two strands of barb on top about 10 feet high, pipe every 100 feet with 1.33 tpost every 10 ft. That still doesn’t keep the hogs in or out. I have seen them at a dead run hit the bottom like a wedge and keep...

He will look so good in the den. Congrats

Is that deep fluting at what degree 40?

jGS still needs the ok to release the print.

137/142 , 4.5/5.5 year old.doesnt have the short leg stocky front end ,no belly of a 6.5 older deer.

Who has the print?

I think someone on this site did a 27 Nosler with a freebore for that around .087? If I remember correctly?

What are you considering, a 35 or 40 shoulder? I would think the 40 would pull down the neck length? I have an old school 280ai not the Nosler ai and Fire forming 280 rem cases does pull it down slightly in my chamber.

key word, entry level, my future daughter in law 5.3, 115 pounds likes the 6.5 and is able to group 3/4 or better moa. I have started loading for it and she is being consistent in her groups. Doing her part in eradicating the pigs off the farm.

I have an eighties mk5 270that wouldn’t shoot factory at all. Worked with it about 2 thou closer to the lands and it would then shoot 1/2 to 3/4. Still have it.

A rifleman,no! But what catches a woman’s fancy is unpredictable.

Is this with which bullets, Berger,Nosler? The ogive might make a difference.

. I asked and was told , just because”, concerning the neck which is .2846 saami and the AW print is .2852. The chamber or the .200 line seems to be of concern if using ADG or possibly Peterson brass being of heavier construction sticking “ clickers “ after several loads, not an issue if you...

What twist barrel for the 245?