Recent content by marley

  1. marley

    7 PRC load seating depth

    I went off of what hornady recommended for the 162 grain eldx. I think it’s a typo like mentioned above.
  2. marley

    7 PRC load seating depth

    This is what I was wondering. Even not knowing the measurements to my lands the ogives between the two bullets should be close. They just look like they are seated too deep as well.
  3. marley

    7 PRC load seating depth

    I picked up some 162 grain and 175 grain ELDXs. Hornady says the COL for the 162s is 3.070" and the 175s at 3.265". The ogive measurement for the 162s is 3.366" and the ogive for the 175s is 3.532". That's a .166" difference. Why are the 162s sat so deep? They look like they are stuffed way into...
  4. marley

    Outdoorsmans fluid head

    Outdoorsmans fluid head with the upgraded arca/outdoorsmans clamps. Used one season. Like new. $600 TYD.
  5. marley

    Leupold VX5 4-20x52 CDS-TZL3

    For sale Leupold VX5 4-20x52 CDS-TZL3 with the TMOA reticle and the much better TZL3 turret. This scope is like new, perfect glass. Just sent it in to have it cleaned inside and out. $1600 TYD.
  6. marley

    NF NXS 5.5-22x56 F2 scope

    MOAR illuminated reticle. Great scope. It does have marks from mounting. Just switching to FFP. 1300 TYD.
  7. marley

    300 NMI -1550 yards

    It pushes a 245 grain berger at 2885 fps.
  8. marley

    300 NMI -1550 yards

    SD was 6! I’ve only put about 100 rounds through it. I use an old shot out barrel to do my fireforming.
  9. marley

    300 NMI -1550 yards

    It’s a Nightforce NX8 4-32
  10. marley

    300 NMI -1550 yards

    This is not pushing it hard. No pressure signs at all. Very accurate node for me.
  11. marley

    300 NMI -1550 yards

    87.5 grains N565 COAL 3.557
Top