KsKevin's latest activity

@Marky_mark … tell us the background and stories on these hunts 😊

Do a light neck tension, load a 162 long and do a 'jam' and see what ur CBTO & COAL measures so you know for ur rifle where that bullet...

As someone who voted for Trump twice, yet was very much hoping (and praying) that an alternative would come along, I have succumbed to...

I’ve got about 12lbs of RL23 for hunting loads but was thinking about picking up some N560 and N565 to do some load development/...

That’s cool. How did you ever get drawn for 3 sheep hunts…I’m sure they were just incredible experiences. 👍

Lance, how are your 280ai loads using VV565 compared to RL23 for 160-180g class bullets? Have you been able to achieve similar speed &...

Factory loaded is .335, once fired is .340, resized above the bulge is .333. I'm using a Dillon 550 for resizing, decapping and seating...

I read it as 1 in 30 inches versus 1 in 20 inches, you were talking degrees. I get it now thanks.

There are some great write ups on Snipers Hide that I used years ago when I got started. The one I found most helpful is a 5 part...

Could you be sizing the neck too much? What is ur neck diameter of a loaded round? 0.333 neck seems a bit small unless you have really...

No, it is a 1 degree 20min which equates to 1.3333°. Most throat angles are 1degree 30min or 1.5°

From an engineering perspective, I can understand the theory behind the +P gaining velocity without increasing peak pressure as it would...

This is similar to my experience as well shooting several large Kansas whitetails & muleys. Pic below has been my experience of typical...

If I had to pick, I agree with you. Ideally the US should simplify the process of purchasing suppressors. Hollywood movies have all...

Ballistically they are nearly twins. I have the same dilemma with a GAP 280AI which is a little bit heavy for the mountains so I built...